Pool design contractors are of great help to get to know the pros and cons of both in-ground and above-ground pools.
Swimming pool design tips
Let’s have a quick comparison of both considering few important factors,
Well installing an in-ground pool is a huge project and much difficult than the above-ground pool with taking much time as well for installation. While above-ground pools are installed in much lesser time like maybe in a day or two, maximum, with much ease. It is advised to take a professional help in both cases as you may get a warranty while otherwise you will have to bear all expenses later on for maintenance or any damage repair.
The major difference between both is the cost which is almost half for above-ground pools than the cheapest prices for in-ground pools. This goes to the type of material used, pool filter, decking of pool apron, plumbing and electrical expenses and the necessary accessories along with the labor costs. Above-ground pools requires less labor cost and lower material requirements.
In-ground pools have the edge here as they can be built with much more designs while you have limited options if you have an above-ground pool. It is because usually above-ground swimming pools are movable and comes in a kit to be installed anywhere. A pool masonry contractor will let you choose the best design as per your available space considering all required factors as well.
Lifespan for in-ground pools is obviously more than an above-ground ones for about 50 years or even more if maintained properly and it is because the sides are exposed in above-ground ones. And, of course, then the lifespan for above-ground pool is usually 25 years which can be stretched a bit more if taken care of very closely. If you have got them designed by proper Pool design contractors, then you can even get a life time guarantee. It will help to increase the life of your pool which may even get doubled if it is professionally maintained time to time.
It depends either you are using chlorine filter system or saltwater system. Well, a pool masonry contractor may guide you well on cleaning and maintenance of water as they are professionally trained for these tasks. While you should know how to clean the floor and sides both manually or with automatic pool cleaner to make it more durable.
Tips for Residential Pool Construction
Now when you are aware of all the differences between both, let’s discuss some tips for construction of residential pools.
- Consider Weather Conditions
Type of pool is largely affected by the climatic conditions of your area as generally you need some extra accessories like a pool cover in you are in a cold area.
- Seek an Expert Guide
It is better to check the expertise of your pool design contractors as experienced personnel will better guide you than the beginner. So, if you are paying them enough amount then must check either they worth such amount or no and you are getting your required quality.
- Keep a Simple Shape
It is because of easier maintenance and cleaning while it will also be cost effective for you.
- Flat Bottom
Though you go for an inclined bottom usually in pools but trust me flat bottoms are much easier to build and then maintain as well.
- Don’t Forget the Long-Term Cost
Pools are not a one-time job as you should be well aware of long-term costs you are going to spend in future. For instance, maintenance cost and the accessories cost are the ones you should necessarily keep in mind if you want your pool to have a good long life.
- Safety Issues
You cannot forget to consider safety issues as it is very important when you are using pool at your place. There could be many dangerous aspects that you need to consider when the water is involved. Like, you may keep an alarming system or child proof locks on gates and other safety measures to enjoy your swimming without any worries.
- Don’t Go for Much Depth
It is recommended to not to opt for much depth as a safety measure while your pool masonry contractors long island may guide you well for the required depth to be used.