How To Safely Remove A Tree

For a safe and healthy environment, tree removal is a mandatory task. If a tree is dead or interferes with the construction of any building, plaza or mall then it is dispatched with the help of professionals. However, we must always pay attention to the amount of time it takes to replace a tree which could be years or even decades. Cutting down dead trees is not a very difficult task but it definitely has a procedure to follow.

Tree Removal Basics

Following are the steps you must follow in order to safely remove a tree:

  1. Check the Surrounding Area for Obstacles

Before getting the buzz of a tree removal, make sure that the location is suitable, look out for any other trees, fences, buildings, vehicles or any sort of obstacle that might cause trouble later. In other words, avoid everything that could get hit by the falling tree. Also, keep your escape route in sight to get away from the falling tree instantly. You can also establish two escape routes on either side of the tree, both of them leading away from the fall line. If are unconfident, try reaching for tree services.

  1. Inspect the Tree

Before rushing to the major part, inspect the tree closely. Pay attention to the branches falling off the tree that need tree cutting, so that the falling tree doesn’t get tangled with the surrounding trees making a complete wreck of the space. Also, focus on the direction of the tree stature, is it straight? Leaning to a side? Make necessary measures to remove all the minor branches or decay if that is in the way of the expected fall line.

  1. Use the Best Equipment

While evaluating your equipment, always try to acquire the finest tools preferably from tree services for the task you are going to perform, this basically reduces your stress level and helps you gain confidence. Moreover, best quality equipment is necessary to get the work done in the most appropriate way. Measure the diameter of the tree and then pick a chainsaw which has a blade of same length. The blade must be accurately oiled and perfectly sharpened for best performance. Make sure to have a full tank of gas, you surely don’t want any trouble when the tree is halfway through cutting. Protection of eyes and ears is necessary.

  1. Right Way of Cutting Down the Tree

If you happen to be cutting a tree that has a 6 inches diameter, consider yourself lucky because it takes fewer amounts of efforts to cut it down. But if the tree has a larger trunk, the tree removal must include the following set of rules:

Choose the side where you want the tree to hit the ground and cut just 1/3 of the trunk which eventually causes the tree to follow the path line.

The angle must be 45 degree between the first cut which is above and the second cut which is at the back of the first one.

The third and the last cut must be from the backside of the trunk and across from the bottom of the nick. Don’t cut all the way through the trunk, stop halfway through the cutting and watch the tree go down to the ground with all its glory. Let your chainsaw rest at a side and follow the escape path for safety.

What To Do When Tree Doesn’t Fall Down

Tree removal can be overwhelming if you somehow end up cutting the tree with wrong angles. But you don’t have to worry, because wedges can be very useful in the case of stubborn trees. Add pressure to the tree by inserting wedges into the back cut.

Cut the Tree Branches

Stretch your legs for a minute or two to observe the branches that could be cut. Always take basic personal care while dealing with the tree. If you are using a saw, never stand on the log you are about to cut and avoid sawing between your legs, it could be risky. To maintain the quality of a blade, keep it far away from dirt. Always find a solid ground to stand, never sit or stand on branches or logs.

Cutting of a tree is not a hard task; it only requires skills, attention and a lot of smart work. If you have got all three of them, you might end up impressing tree services potomac md!

Leave a Reply

Your email address will not be published. Required fields are marked *